Panasonic KX-TCD420AL Answering Machine User Manual


 
13
Cordless Telephone
Caller ID
Caller ID Service
Caller ID is a service of your Network provider and will only operate if you have
subscribed to this feature.
After subscribing to Caller ID, this phone will display the caller information.
If your unit is connected to a PBX or a telephone line that does not support this service,
you will not be able to use it.
Caller ID does not display caller information while using the handset for an intercom call.
However, the caller information will be stored to the Caller ID List.
Call Waiting and Caller ID Compatible: If you subscribe to Caller ID service, your
handset displays the second caller’s information while talking. After you hear a call-
waiting tone, the caller’s phone number will be displayed.
You can answer the second call, keeping the first call on hold. Follow Telstra or your
service provider instructions using RECALL.
If the phone number is stored in the phonebook with its name, the caller’s name will
also be displayed.
The second caller’s information will not be displayed when the answering system is
recording someone’s message.
Please contact Telstra or your service provider for details and availability in your area.
Using Caller ID Type II
When you receive a second call during a conversation, you will hear a signal tone
following the call waiting tone and the conversation will be interrupted or muted for
a short period of time. This is not the fault of the product as these events are normal.
Note: The tones are generated by the telephone company.
TCD420AL_e.book Page 13 Tuesday, July 1, 2003 11:16 AM