Filter
Top Products
76
Before Requesting Help
Problem
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The portable unit does not
ring.
The base unit does not
ring.
You cannot program items,
such as the recall time
setting.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory or cannot store a
phone number in speed
dial memory or in the one-
touch auto dial button.
Remedy
• Locate the portable unit and the base
unit away from other electrical appliances
(p. 3).
• Move closer to the base unit.
• Extend the antennas fully.
•
Press (EXIT/CH) to select a clearer channel.
• The ringer volume is set to OFF. Set to
HIGH or LOW (p. 14).
• The ringer volume is set to OFF.
Press (HOLD/RINGER) while the unit is in
the standby mode (p. 15).
• Programming is not possible while the
unit is in the talk, speakerphone,
intercom mode or when viewing the
Caller List/directory list.
• Do not pause for over 60 seconds while
storing.
• Move closer to the base unit.
• If a power failure occurs, programmed
information may be erased. Reprogram if
necessary.
• You cannot store an item in the directory
while the unit is in the talk or intercom
mode.
• You cannot store a phone number in
speed dial memory or a phone number in
the one-touch auto dial button
while the
unit is in the speakerphone, talk or
intercom mode.
• Do not pause for over 60 seconds while
storing.