Filter
Top Products
16
Settings
Setting the Time and Date
You can select AM/PM or 24-hour clock by programming.
Make sure that the base unit and portable unit are in the standby
mode.
Base Unit
1
Press (FUNCTION/EDIT) on the base unit.
2
Press or repeatedly until “SET
CLOCK ?” is displayed.
3
Press OK .
4
Enter the current time (hour and minute)
by using a 4-digit number.
(Ex. To set 9:30, enter “0930”.)
• For AM/PM setting: Enter numbers
between 0100 and 1259.
For 24-hour clock: Enter numbers
between 0000 and 2359.
12:00
AM
1/1
SAVE AUTO# ?
12:00
AM
1/1
SET CLOCK ?
12:00
AM
01/01
2000
ENTER TIME
09:30
AM
01/01
2000
ENTER TIME
5
Press OK .
• If numbers between 0000 and 0059, or
1300 and 2359 are entered, the time
will automatically be set using the
24-hour clock. Skip the steps 6 and 7
and go to the step 8.
6
Press (#) to select “AM” or “PM” or
24-hour clock.
(Ex. You select “PM”.)
Display Option
AM ..................... AM
PM ..................... PM
(Blank display)
.......... 24-hour clock
• Each time you press (#), the selection
will change on the display.
09:30
AM
01/01
2000
#=AM/PM
09:30
PM
01/01
2000
#=AM/PM
→
→
→