Filter
Top Products
74
Wall Mounting
If “Recharge battery” is displayed and/or “” flashes after being
fully charged, replace the battery with a new Panasonic P-P301 (KX-A36A)
battery.
To avoid memory loss, replace within 3 minutes.
1
Remove the cover by sliding while
pressing the arrow.
2
Replace the battery, and close the
cover.
3
Make sure to charge the new
battery for about 10 hours in order
to display the battery strength
prompt correctly (p. 12).
Battery Replacement
Charger
The charger can be wall mounted.
Install screws using the wall template below. Connect the AC adaptor.
Mount the charger, then slide it down.
To Power Outlet
3 cm
Screws
Wall Template
3 cm