Filter
Top Products
One-Touch Dialler
Base Unit
48
Storing Phone Numbers in Memory
You can store up to 3 phone numbers in the one-touch auto dial buttons.
Do not press any one-touch auto dial buttons before storing to prevent
misoperation.
1
Press (FUNCTION/EDIT) on the base
unit.
2
While “SAVE AUTO# ?” is displayed,
press OK .
3
Enter a phone number up to 22 digits.
• If you enter a wrong number, press
(CLEAR) and enter the correct
number.
4
Press one of the one-touch auto dial
buttons ((M1), (M2) or (M3)).
(Ex. (M1) is pressed.)
• A beep sounds.
• To store other numbers, repeat steps
2 through 4.
• To return to the standby mode, press
(EXIT).
You cannot access any numbers stored in a portable unit from the base
unit.
Make sure that the base unit and portable unit are in the standby mode.
To erase a stored number
1. Press (FUNCTION/EDIT) on the base unit.
2. Press OK .
3. Press one of the one-touch auto dial buttons ((M1), (M2) or (M3))
required.
• A beep sounds.
• If
a pause is required for dialling, (REDIAL/PAUSE) can be stored in a
phone number counting as one digit (p. 62) in step 3.
• You can exit the programming mode any time by pressing (EXIT).
11:34
AM
11/25
SAVE AUTO# ?
11:34
AM
11/25
ENTER PHONE NO.
11:34
AM
11/25
1234567890
AUTO OR M# =SAVE
11:34
AM
11/25
1234567890
SAVE IN M1