Filter
Top Products
34
RECALL Button
Pressing (RECALL) allows you to use special features of your host PBX
such as transferring an extension call or accessing special telephone
services (optional) such as call waiting.
Selecting the recall time
The recall time depends on your telephone exchange or host PBX.
You can select from recall times: “700, 600, 400, 300, 250, 110, 100 or 90
ms (milliseconds)” using the handset near the base unit. Your phone
comes from the factory set to “100 ms”.
Make sure that the unit is in the standby mode.
• You can exit the programming mode any time by pressing
(EXIT/CH).
• If 3 beeps sound and the display shows “Save error”, move closer to
the base unit and try again. If “Save error” is still displayed, place the
handset on the base unit. Start again from step 1.
1
Press (FUNCTION/EDIT).
2
Press or repeatedly until the arrow
points to “Program”.
3
Press OK (Yes key).
4
Press or repeatedly until the arrow
points to “Set recall time”.
5
Press OK (Yes key).
6
Press or repeatedly until the desired
time is displayed.
7
Press OK (Save key).
• A beep sounds.
• To return to the standby mode, press
(EXIT/CH).
H
Program
GF
H
OK=Yes
H
Set recall time
Set dial mode
GF
H
OK=Yes
Recall time
:100ms
GF
H
OK=Save
Special Features