Filter
Top Products
25
Advanced Operation
Enter name
#=
←→
H
OK=Next
• If a pause is required for dialling, (PAUSE) can be stored in a phone
number counting as one digit (p. 33) in step 5.
• You can exit the programming mode any time by pressing (EXIT/CH).
• If the display shows “Memory is full” in step 2, the display will return
to step 1. Press (EXIT/CH), and erase other stored items from the
directory (p. 32).
1
Press (FUNCTION/EDIT).
2
While the arrow points to “Save
directory”, press OK (Yes key).
• The display shows the number of stored
items in the directory.
3
Enter a name, up to 15 characters, with the
dialling buttons, (*) (←) or (#) (→).
• See the steps for entering names and
symbols (p. 26).
• If a name is not required, press
OK
(Next key) and go to step 5.
4
Press OK (Next key).
5
Enter a phone number up to 22 digits.
• Each time you press the digit to the
left of the cursor is erased.
6
Press OK (Save key).
• A beep sounds.
• The display will return to step 1. You can
continue storing other items after pressing
OK (Yes key).
• To return to the standby mode, press
(EXIT/CH).
Directory=
0 item
Enter phone no.
Tom Jones
0987654321
H
Save directory
Ringer volume
GF
H
OK=Yes
0987654321
H
OK=Save
Enter name
Tom Jones
#=
←→
H
OK=Next