Filter
Top Products
Settings
10
While in use (TALK)
8 hours
While not in use (Standby)
Recharge
Recharge the battery when:
— “Recharge battery” is displayed,
— “ ” flashes on the display, or
— the handset beeps intermittently while it is in
use.
• If you DO NOT recharge the handset battery for more than 30 minutes,
the display will keep indicating “Recharge battery” and/or “ ” will
continue to flash.
• To fully recharge the battery the handset should be left in the base unit
for 10 hours.
20 days
Approx. battery life
Standby mode (The handset is off the base unit.)
The handset goes into the standby mode after you finish using the handset
(making/answering a call, viewing the Caller List or directory items etc.).
The display is blank, but the handset can receive calls.
The battery life is conserved in this mode.
• Battery life may be shortened depending on usage conditions, such as
viewing the Caller ID Caller List or directory items and ambient
temperature.
• Clean the handset and the base unit charge contacts with a soft, dry
cloth once a month. Clean more often if the unit is subject to
grease, dust or high humidity. Otherwise the battery may not charge
properly.
• If the battery is fully charged, you do not have to place the handset on the
base unit until “Recharge battery” is displayed and/or “ ” flashes.
This will maximize the battery life.
• The battery cannot be overcharged.
Battery information
After your Panasonic battery is fully charged (p. 9):
Operation
Recharge battery