Filter
Top Products
31
Advanced Operation
• You can exit the programming mode any time by pressing (EXIT/CH).
1
Press or repeatedly to find the
directory item you want to change, then
press OK.
• To search for the item by initial, see
page 29.
2
While the arrow points to “Edit”, press
OK (Yes key).
3
Edit the name by using the dialling
buttons, (*) (←) or (#) (→) (p. 26), up to 15
characters.
• If you do not need to change the name,
go to step 4.
4
Press OK (Next key).
• If you do not need to change the
number, press
OK (Save key).
5
Add a number to the current number.
• Each time you press the digit to the
left of the cursor is erased.
6
When finished, press OK (Save key).
• The display will return to step 1. You can
continue editing other items.
• To return to the standby mode, press
(EXIT/CH).
Editing an Item in the Directory
Make sure that the unit is in the standby mode.
Jane Walker
0981234567
Jane
1234567
H
Edit
Clear
GF
H
OK=Yes
Enter name
Jane
#=
←→
H
OK=Next
1234567
H
OK=Save
0981234567
H
OK=Save
Enter name
Jane Walker
#=
←→
H
OK=Next