Filter
Top Products
1.5 Absence Settings
66 User Manual
Call Forwarding (FWD) for your Incoming Call Distribution Group
• The FWD/DND button light shows the current status as follows:
Off
: Both features are not set.
Flashing red slowly
: FWD mode
Red on
: DND mode
• The Group FWD button light shows the current status as follows:
Off
: No set
Red on
: FWD mode
• The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/
DND Setting Mode. Ask your manager what mode your system is in if you are
not sure.
(1) When in the FWD/DND Cycle Switch Mode
:
Pressing the FWD/DND button (fixed button) while in idle status will cycle
the setting as shown below:
(2) When in the FWD/DND Setting Mode
:
Pressing the FWD/DND button (fixed button) while in idle status will take
you directly to the programming mode for the FWD/DND setting.
(Refer to "
3.1.2 Settings on the Programming Mode".)
Note
A FWD/DND button (customized button) is always in FWD/DND Cycle Switch
Mode: the mode cannot be changed.
PT/SLT/PS
0
1
Set
Cancel
Enter 1 to set
or 0 to cancel.
Enter ICD Group
extension number.
ICD Group
extension no.
Off-hook.
5
6
4
Both Calls
Intercom Calls
Outside Calls
Enter 71.
1
7
Enter 4 to 6 as
you desire.
Enter #.
On-hook.
Enter destination extension number.
Or enter CO line access number
and then outside phone number.
destination
extension no.
(Max. 32 digits)
outside
phone no.
CO line
access no.
C.Tone
ICD Group: Incoming Call Distribution Group
For "Cancel",
go on-hook directly.
OR
OR
OR
OR
FWD DND Off