Filter
Top Products
Answering system
Problem Cause/solution
The unit does not record
n
ew messages.
R The answering system is turned off. Turn it on (page 35).
R The message memory is full. Erase unwanted messages
(page 37).
R The recording time is set to “Greeting only”. Change the
setting (page 40).
R If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company, not
your telephone. Change the unit’s number of rings setting or
contact your service provider/telephone company (page 40).
I cannot operate the
a
nswering system
remotely.
R The remote access code is not set. Set the remote access
code (page 38).
R You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 38).
R The answering system is turned off. Turn it on (page 39).
The unit does not emit the
s
pecified number of rings.
R If the first ring is turned off, the number of rings decreases by 1
from the specified number of rings.
Liquid damage
Problem Cause/solution
Liquid or other form of
m
oisture has entered the
handset/base unit.
R Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the handset/base unit are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorized service center.
Caution:
R T
o avoid permanent damage, do not use a microwave oven to speed up the drying process.
46
For assistance, please visit http://www.panasonic.com/help
Useful Information
PRS120(en)_0122_ver110.pdf 46 2014/01/22 10:09:32