Filter
Top Products
Note:
R I
f you edit a phonebook entry which is
assigned for monitoring, the edited entry
does not transfer to the monitor.
n By entering phone numbers:
1 MMenuN (right soft key) #268
2 MbN: “On” a MSelectN
3 MbN: Select “External” to monitor
from an outside line. a MEditN a
MAddN
4 MbN: “Manual” a MSelectN
5 Enter the desired name. a MOKN
6 Enter the desired number. a MOKN
a MSelectN
R “Baby monitor” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
T
he monitored handset cannot be used while
baby monitor is set to “On”.
1 Press MMenuN on the handset being
monitored.
2 MbN: “On/Off” a MSelectN
3 MbN: “Off” a MSelectN a MOFFN
Editing an outside monitoring number
1 P
ress MMenuN on the handset being
monitored.
2 MbN: “On/Off” a MSelectN
3 MbN: “On” a MSelectN
4 MbN: Select the outside line. a MEditN
5 MMenuN a MbN: “Edit” a MSelectN
6 Edit the name if necessary. a MOKN
7 Edit the phone number if necessary. a
MOKN a MSelectN
Erasing an outside monitoring
n
umber
1 Press MMenuN on the handset being
monitored.
2 MbN:
“On/Off” a MSelectN
3 MbN: “On” a MSelectN
4 MbN: Select the outside line. a MEditN
5 MMenuN a MbN: “Erase” a MSelectN
6 MbN: “Yes” a MSelectN a MOFFN
Baby monitor sensitivity
Y
ou can adjust the sensitivity of the baby
monitor. Increase or decrease the sensitivity to
adjust the sound level needed to trigger the
baby monitor feature.
R This feature cannot be set during a
monitoring call.
1 Press MMenuN on the handset being
monitored.
2 MbN: “Sensitivity level” a
MSelectN
3 MbN: Select the desired setting. a
MSaveN a MOFFN
Answering the baby monitor
n W
hen monitoring with a handset:
Press M
N
to answer calls.
If you want to respond from the monitoring
handset, press MMuteN.
R The monitoring handset will answer calls
automatically when the auto intercom
feature is set to “On” (page 16).
Note:
R If you receive an outside call when
communicating with the monitored
handset, you hear 2 tones. To answer
the call, press MOFFN, then press M
N.
n W
hen monitoring from an outside line:
To answer a call, follow the operation for
your phone.
If you want to respond from the monitoring
handset, press #1 using tone dialing.
You can turn off the baby monitor feature
by pressing #0.
Note:
R 2 minutes after the monitored handset
starts a call, communication between the
monitored handset and monitoring
phone line is turned off automatically.
30
For assistance, please visit http://www.panasonic.com/help
Programming
PRS120(en)_0122_ver110.pdf 30 2014/01/22 10:09:31