Filter
Top Products
Problem Cause/solution
I cannot display the
w
allpaper.
R Wallpaper is displayed in the standby mode only when you
select “Digital(Small)” or “Off” for the clock setting.
Change the clock setting (page 24).
I cannot register a handset
t
o a base unit.
R The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 32).
Battery recharge
Problem Cause/solution
The handset beeps and/or
flashes.
R B
attery charge is low. Fully charge the batteries (page 10).
I fully charged the
b
atteries, but
–
still flashes,
– is displayed, or
–
the operating time
seems to be shorter.
R C
lean the battery ends (
, ) and the charge contacts with
a
dry cloth and charge again.
R It is time to replace the batteries (page 9).
Making/answering calls, intercom
Problem Cause/solution
is displayed.
R T
he handset is too far from the base unit. Move closer.
R The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.
R The handset is not registered to the base unit. Register it
(page 32).
Noise is heard, sound cuts
i
n and out.
R You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.
R Move closer to the base unit.
R If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.
The handset does not ring. R T
he ringer volume is turned off. Adjust ringer volume (page 14,
23).
R Silent mode is turned on. Turn it off (page 27).
I cannot make a call. R T
he dialing mode may be set incorrectly. Change the setting
(page 13).
I cannot make long
d
istance calls.
R Make sure that you have long distance service.
44
For assistance, please visit http://www.panasonic.com/help
Useful Information
PRS120(en)_0122_ver110.pdf 44 2014/01/22 10:09:32