Filter
Top Products
H
Monitoring
38 For assistance, please visit http://www.panasonic.com/phonehelp
Monitoring feature
This feature allows you to monitor the
room where a unit is located. The
monitored unit does not ring, allowing you
to easily monitor a baby’s room, for
example, from different areas of the
house.
You can monitor:
– the sound in a room (“Audio monitor”,
page 38)
– the image and sound of a room (“Video
monitor using the handset”, page 39).
Note:
LYou can place the handset on the
charger while monitoring using the
speakerphone.
Enabling monitoring access
To use the monitoring feature, you need to
set the destination unit to be monitored
beforehand.
–“Permit”: allows the unit to be
monitored.
–“Deny”: denies access from other units.
1 {MENU} (F2) i x i {SELECT}
2 “Monitor access” i {SELECT}
3 Select the desired setting. (Default:
“Deny”) i {SAVE} i {OFF}
Audio monitor
This feature allows you to listen to the
audio in the room where the handset or
base unit is located.
Monitoring audio in the room
1 {MENU} (F2) i H i {SELECT}
2 “Audio only” i {SELECT}
3 Select the desired unit. i {SELECT}
LYou can listen to the audio in the
room through the destination unit.
4 Press {OFF} to stop monitoring.
Note:
LTo start monitoring quickly, press
{INTERCOM}, then press {*} instead
of steps 1 and 2.
Before using this feature, allow access
to the destination unit by selecting
“Permit” in the monitor access setting
(page 38).
THA12_THA17.book Page 38 Tuesday, March 14, 2006 10:05 AM