Panasonic KX-TC1871NZB Answering Machine User Manual


 
Before Requesting Help
94
Problem
You cannot program items,
such as the dialling mode.
Previously programmed
information is erased.
Recharge battery” is
displayed, “ ” flashes or
the unit beeps intermittently.
You charged the battery
fully, but “Recharge
battery” is still displayed
and/or “ ” continues to
flash.
The IN USE/CHARGE
indicator light does not go
out while charging.
Cause and Remedy
Programming is not possible while the
unit is in the talk or speakerphone
mode, when viewing the Caller
List/directory list, or while the answering
system is in use.
Do not pause for over 60 seconds while
programming.
Move closer to the base unit.
(›), (‹), BACK (fi) or FWD/EDIT (fl)
may have been pressed when you
picked up the handset. Press
(FUNCTION/EXIT/CH) and try again.
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
Charge the battery fully (p. 15).
Clean the charge contacts and charge
again (p. 16).
Install a new battery (p. 88).
This is normal.
For New Zealand Customers
Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.
PQQX12877ZA-6 00.8.23 10:54 AM y[W 94