Filter
Top Products
47
Cordless Telephone
One-Touch Dialler
“
A phone number stored in the (DIRECT) button can be dialled with
a one-touch operation.
Storing a Phone Number in the DIRECT
Button
Make sure the unit is in the standby mode.
1
Press (FUNCTION/EXIT/CH).
2
Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (fl) (Yes key).
4
While the arrow points to “Save
DIRECT#”, press FWD/EDIT (fl) (Yes key).
5
Enter a phone number, up to 22 digits.
≥Each time you press (INTERCOM/CLEAR)
the digit to the left of the cursor is erased.
To erase all of the digits, press and hold
(INTERCOM/CLEAR).
6
Press (›) (Next key).
≥If you want to edit the entered number, press
(‹) (Edit key) and return to step 5.
7
Press FWD/EDIT (fl) (Save key).
≥A beep sounds.
≥To return to the standby mode, press
(FUNCTION/EXIT/CH).
≥You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
≥If a pause is required for dialling, (REDIAL/PAUSE) can be stored in a phone
number counting as one digit (p. 62) in step 5.
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set recall time
43
1
=Yes
21
4
=Next
1234567890123456
789012
21
4
=Next
1234567890123456
789012
3
=Edit
1
=Save
1234567890123456
789012
Save DIRECT#
PQQX12877ZA-3 00.8.23 10:50 AM y[W 47