Panasonic KX-TC1871NZB Answering Machine User Manual


 
74
Pager Call
Pager Mode Setting
After subscribing to a Caller ID service (p. 36), you can select one of
the following pager mode settings. The unit will alert your pager:
If you want to change the mode, proceed as follows.
1
Press (FUNCTION/EXIT/CH).
2
Press (›) or (‹) repeatedly until the arrow
points to “Program”.
3
Press FWD/EDIT (fl) (Yes key).
4
Press (›) or (‹) repeatedly until the arrow
points to “TAD program”.
5
Press FWD/EDIT (fl) (Yes key).
The base unit display shows the answering
system function menu.
6
Press (6).
The current setting is displayed on the base
unit.
7
To select “Received call”, press (2).
OR
To select “Recorded MSG”, press (1).
8
Press FWD/EDIT (fl) (Save key).
A beep sounds.
To return to the standby mode, press (FUNCTION/EXIT/CH).
If you select “Received call” and set the unit to call your pager (p. 75), the unit
will alert your pager even if the answering system is not turned on.
Even if you select “Received call”, the unit will not alert your pager when a
Caller ID call which does not have a phone number is received and the caller
does not leave any message.
Ringer volume
1
Program
43
1
=Yes
1
Save DIRECT#
Set recall time
43
1
=Yes
1
TAD program
43
1
=Yes
Answering
system setting.
See base unit.
Pager mode
:Recorded MSG
Base unit display
Recorded MSG: After the unit records an incoming message
(factory preset),
OR
Received call: Each time the unit receives a Caller ID call, even
if the caller does not leave a message.
PQQX12877ZA-5 00.8.23 10:53 AM y[W 74