Panasonic KX-TC1871NZB Answering Machine User Manual


 
26
To check the day/time
Repeat steps 1 to 6 on page 25.
The current day/time is heard. When finished, press (FUNCTION/EXIT/CH).
For Caller ID service users (p. 36)
The Caller ID information will re-set the clock after the first ring if the
adjusted time is incorrect. However, the day will not be re-set by the Caller
ID information. Adjust the correct day by following the steps on page 25.
If the time has not previously been set, the Caller ID information will not
adjust the clock.
The Caller ID information will automatically adjust the clock for daylight
saving time.
If a power failure occurs, “ ” will flash or the incorrect day/time will
be shown on the main unit display. Reprogram the current day/time.
In step 7, you cannot enter numbers greater than 12. Do not use military time.
(To set 13:00 hours, enter “0100” and select “PM” by pressing ($).)
Preparing the Answering System
PQQX12877ZA-2 00.8.23 10:49 AM y[W 26