Panasonic KX-FPG378 Telephone User Manual


 
1. Introduction and Installation
17
For Fax Advantage assistance, call 1-800-435-7329.
1.9 Battery installation
1 Insert the battery (1), and press it down until
it snaps into the compartment.
2 Close the battery cover.
1.10 Battery replacement
If battery performance diminishes, make sure
you have cleaned the charge contacts and fully
charged the battery. After recharging if
Recharge battery is displayed and/or
68879 continues to flash, or Charge for 6h
and 68889 are displayed, the battery needs to be
replaced.
Please use only Panasonic battery. See page
9 for accessory information.
L Only use rechargeable battery. If you
install non-rechargeable battery and start
charging them, the battery may leak
electrolyte.
1 Press the notch on the battery cover firmly,
and slide the cover.
2 Replace the old battery with a new one, and
close the cover (see the battery installation
procedure on page 17).
Attention:
A nickel metal hydride battery that is recyclable
powers the product you have purchased.
Please call 1-800-8-BATTERY for information on
how to recycle this battery.
1
FPG379-PFQX2138ZA-en.book Page 17 Wednesday, January 12, 2005 4:49 PM