Filter
Top Products
24
Subscription Registration
1. Subscription Registration
The PS can store IDs for use with up to 4 RE.
Authentication Code (AC) are required for each system.
1. Press the [Power] key while pressing and holding
the [Intercom] and [#] keys to select PS registra-
tion mode.
Note: • The mode Nos. are displayed. Nos. in use blink.
Nos. not in use light continuously.
2. Select a registration No.
3. Press the [Off-hook] key.
4. Enter your AC Authentication code from 1 to 4
digits (specified for the combination of RE and
PS).
Note : Enter the same code that registered to RE.
5. Press the [Programming] key to start authentica-
tion using the entered parameters.
The RE sends the PS a completion tone on successful registration of the ID.
Note: • How to switchover from the current connected RE to another RE, refer page11- 4: [F] key on this manual.
INT