16
APPLIED OPERATION
1. Speed Dial
You can store frequently-dialled outside or internal Nos. under speed dialling Nos. for quick
calling.
1.1 Storing/Checking Speed Dialling Nos.
You can store up to 10 speed dialling Nos., each consisting of up to 32 digits.
Reference: • You can store speed dialling Nos. even when out of range or while making another call.
• The stored Nos. remain in memory even when the power is OFF.
1. Press the [Programming] key while the PS is not
being used or even if a call is in progress to enter
the programming mode.
2. Press [Speed dial] key.
3. Storing/Checking a Speed Dialling No.
[To store a speed dialling No.]
(1) Press the Speed dial No. (1 to 9 and
0) under which to store the destina-
tion telephone No.
Reference: • You can also press the volume keys
(▲ and ▼) to go forward or to go
previous speed dial Nos.
(2) Enter the telephone No. (32 digits
max.).
Reference: • If you make a mistake entering the telephone No., press the [On-Hook] or
[HOLD] key to erase the telephone No. and enter the telephone No. again.
Each press of the [HOLD] key deletes a letter from the last entered
telephone No. Also, pressing the [On-hook] key deletes the entire tel-
ephone No.
• To enter a pause, press the [Redial] key. Set the pause time in the
“Programming Manual.”
[To check a speed dialling No.]
(1) Press the Speed Dial No. (1 to 9, 0)
that you want to check.
Reference: • Press the [Volume] key (▲ and ▼) to display the Speed Dial No. on the
display.