Panasonic BB-GT1500C Telephone User Manual


 
Useful Information
84
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
STATUS indicator
Problem Cause/solution
The STATUS indicator
continues flashing in amber.
L An IP address may not have been acquired or
the static IP address is not appropriate. Check
the base unit’s IP address using the handset:
{MENU} i {#}{5}{0}{1}
If necessary, change the base unit’s static
IP address (page 29).
If an IP address was not acquired, check
your network devices’ (router, modem, etc.)
connections. If the connections are made
properly but the problem persists, check
your network devices’ (router, modem, etc.)
settings.
L Many installation issues can be resolved by
resetting all the equipment. First, shut down
your modem, router, base unit, and computer.
Then turn the devices back on one at a time in
this order: modem, router, base unit,
computer.
L If you cannot access Internet Web pages
using your computer, check to see if your
Internet service provider is having connection
issues in your area.
L For more troubleshooting help, visit
www.joip.com or contact the A service
provider.
The STATUS indicator flashes
in amber rapidly although the
IP address was acquired.
L Unplug the base unit’s AC adaptor to reset the
unit, then reconnect the AC adaptor. If the
STATUS indicator is still flashing in amber
rapidly, there may be a problem with the base
unit hardware. Contact Panasonic service
personnel.
The STATUS indicator lights in
amber although the Ethernet
cable is connected properly.
L The base unit’s IP address may conflict with
the IP addresses of other devices on your
local network. Check the base unit’s static IP
address using the handset: {MENU} i
{#}{5}{0}{1}, then check the IP addresses
of the other devices on your local network. If
necessary, change the base unit’s static IP
address (page 29).
GT15xxC.book Page 84 Tuesday, July 24, 2007 7:17 PM