Filter
Top Products
Preparation
18
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
4 Install the battery:
Press the notch of the handset cover firmly, and slide it in the direction of the
arrow (A). Insert the battery (B), and press it down until it snaps into position
(C). Then close the handset cover (D, E).
5 Charge the battery:
Place the handset on the base unit.
L If “Charge for 7 HRS” is displayed, wait for at most 15 minutes until
“Please read joip Terms of Use. Agree?” is displayed.
L To fully charge the battery, place the handset on the base unit for 7 hours. For
battery information, see page 20.
6 Agree to the A Terms of Use:
To use the A IP line, read the Terms of Use for the A services on the
included leaflet or at www.joip.com then press {YES} (left soft key) while
“Please read joip Terms of Use. Agree?” is displayed.
L To agree to the Terms of Use later, press {NO}. When you want to agree,
press {IP} and wait until the display changes from “Free calls! Plug
internet cable. www.joip.com” to “Please read joip Terms of
Use. Agree?”. Press {YES} to agree to it.
7 Check for Internet access:
Wait until the STATUS indicator on the base unit turns green.
– When the STATUS indicator on the base unit lights in green, the installation is
complete. Your A number is displayed on the handset 1 (included with your
base unit). Once you start operations with the handset, it disappears from the
display (page 30).
C
E
D
A
B
Confirm the charge
indicator is on.
Model shown is BB-GT1500.
[
Please read joip
Terms of Use.
Agree?
YES NO
GT15xxC.book Page 18 Tuesday, July 24, 2007 7:17 PM