Filter
Top Products
Answering System
65
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Caller’s recording time N
You can change the maximum message
recording time allotted to each caller.
The default setting is “3min”.
1 {MENU} i {#}{3}{0}{5}
2 {V}/{^}: Select the desired line.
3 {V}/{^}: Select the desired setting.
4 {SAVE} i { OFF}
Message alert N
You can select whether or not the
message indicator on the handset
flashes (slowly) when new messages
are recorded. The default setting is
“Off”.
Important:
L If there are new Voice Mail messages
(page 66), the message indicator on
the handset also flashes slowly.
1 {MENU} i {#}{3}{4}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i { OFF}
Note:
L While message alert feature is on, the
battery operating time is shortened
(page 20).
Call screening N
This feature allows you to listen to a
message from the base unit while the
answering system is recording the
message. The default setting is “On”.
1 {MENU} i {#}{3}{1}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE} i { OFF}
GT15xxC.book Page 65 Tuesday, July 24, 2007 7:17 PM