Panasonic BB-GT1500C Telephone User Manual


 
Preparation
19
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
When the STATUS indicator on the base unit does not light in green even if you
wait for a few minutes, see page 23.
Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to
feel warm during use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
L The unit will not work during a power failure. To use the landline, we recommend
connecting a corded telephone to the same telephone line or to the same
telephone line jack using a T-adaptor.
For DSL service users k
If the base unit is connected to a landline with DSL service, please attach a noise
filter (contact your DSL provider) to the telephone line between the base unit and the
telephone line jack in the event of the following:
Noise is heard during conversations using the landline.
Call Display features do not function properly for landline calls.
Connecting the AC adaptor (BB-GT1502)
L Use only the included Panasonic AC adaptor PQLV208.
Model shown is
BB-GT1500.
Amber Green
joip:#1001060429
Your A number
Noise filter
To single-line
telephone jack
(RJ11C)
Fasten the AC adaptor cord to prevent
it from being disconnected.
Bottom of
the charger
(120 V AC, 60 Hz)
Hooks
Hooks
GT15xxC.book Page 19 Tuesday, July 24, 2007 7:17 PM