Filter
Top Products
Programming
51
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
Programming using the direct commands N
1
{MENU} i {#}
2 Enter the desired feature code.
3 Enter the desired setting code. i {SAVE}
L This step may vary depending on the feature being programmed.
4 {OFF}
Note:
L In the following table, < > indicates the default setting.
L If you make a mistake or enter the wrong code, press {OFF}, then start again from
step 1.
Feature Feature code Setting code Page
Alarm {7}{2}{0} –55
Auto Intercom {2}{7}{3}{1}: On (Ringer On)
{2}: On (Ringer Off)
{0}: <Off>
68
Auto talk
*1
{2}{0}{0}{1}: On {0}: <Off>32
Display language {1}{1}{0}{1}: <English>
{2}: Français
27
Date and time
*2
{1}{0}{1} –27
Deregistration {1}{3}{1} –77
Handset name {1}{0}{4} –55
HS registration
(Handset registration)
{1}{3}{0} –76
Interrupt tone
*3
(Handset)
{2}{0}{1}{1}: <On>
{0}: Off
–
Interrupt tone
*2*3
(BB-GT1540 base unit)
{*}{2}{0}{1} –
IP/TEL select
(Handset)
{2}{5}{0}{1}: IP
{2}: <TEL>
28
IP/TEL select
*2
(BB-GT1540 base unit)
{*}{2}{5}{0} 28
Key tone
*4
{1}{6}{5}{1}: <On> {0}: Off –
LCD contrast
(Display contrast)
{1}{4}{5}{1}-{6}: Level 1–6 <3> –
Message alert {3}{4}{0}{1}: On {0}: <Off> 65, 67
GT15xxC.book Page 51 Tuesday, July 24, 2007 7:17 PM