Filter
Top Products
6. Using Additional Features
64 Issued April 2000 DBS-32-755
Using the Mute Key
You can use the
MUTE
key on your phone to mute the handset or
microphone so that the party on the other end cannot hear you. The Mute
indicator flashes when using handset mute, and lights steadily when the
microphone is muted.
1. Pick up the handset or press
ON/OFF
.
2. Dial the desired number.
3. Press
MUTE
to mute your conversation. Press
MUTE
again to turn the
mute function off.
Note:
Handset Mute requires DBS software version CPC-AII/B v. 8.0 or
higher, CPC-S/M v. 2.0 or higher, or CPC-EX v. 1.0 or higher.
Using Off-Hook Monitor
Note:
This feature requires DBS software version CPC-AII/B v. 8.0 or higher,
CPC-S/M v. 2.0 or higher, or CPC-EX v. 1.0 or higher.
Off-Hook Monitor allows you to play a called or calling party’s voice through
the speaker on your phone, even if you are using the handset. This allows a
third party to hear both sides of a conversation.
To use Off-Hook Monitor, press the
ON/OFF
key while using the handset
during a conversation. The other party’s voice will be played through both the
handset and the speaker. To turn off Off-Hook Monitor, press the
ON/OFF
key again.
Note:
Off-Hook Monitor does not activate your phone’s microphone. The
party at the other end will hear only audio transmitted through your handset.
Locking Your Extension
Use this feature to restrict unauthorized access to your phone. When your
phone is “locked,” it cannot be used to make outside calls. It can, however, be
used to make internal calls. Lockout codes must be programmed by your
system administrator or DBS dealer.
1. Pick up the handset or press
ON/OFF
.
2. Dial
74
.
3. Dial the 4-digit lockout code.