Filter
Top Products
39
ANSWERING MACHINE OPERATION
Answering machine On / Off
During standby mode,
1. Press and hold key to switch the answering machine off.
The voice prompt, “
Answering off” can be heard followed by two short beeps.
Note: During Off mode, the answering machine is set to Announcement Two
mode automatically. It will answer the call after 12 rings, and then switch to
remote control mode.
During Off mode,
1. Press and hold key to switch the answering machine on.
The voice prompt, “
Answering on, Announcement One” can be heard followed
by a short beep.
OGM (Outgoing Messages)
M5500 has two OGM modes:
OGM1 (Announcement One) mode:
Callers can hear a pre-recorded message “Please leave a message after the beep”
and the unit records the caller's message.
OGM2 (Announcement Two) mode:
Callers can hear the other pre-recorded message “Please call later” . Under this
mode, the caller will NOT have the opportunity to leave a message.
You can also record your own personalized greeting (from 3 seconds to 120 seconds).
Note: The default setting is OGM1 (Announcement One).
OGM setting
1. You can set the OGM mode in the TAD setting mode (Refer to “answering mode
setting” section on P30).
2. Or press key to switch between OGM1 and OGM2.
Answering Machine Operation