Filter
Top Products
11
BASIC OPERATION
Basic Operation
During standby
Cordless handset's LCD display
HANDSET 1 : Handset number
: Current battery level
: Signal icon indicates the
cordless handset is linked to the base unit.
Base unit’s LCD display
CLIP 10-30 : Total 30 calls with 10 new calls
A1 : OGM 1
Message15/35 : Total 35 messages with 15 new
messages
Answering an incoming call
Note: If the power is not connected to the base unit.
The cordless handset CANNOT operate. However, you can still
make and receive a call using the corded handset.
HANDSET
With cordless handset
When there is an incoming call, the phone rings and
flashes on the display. If a CID
record is received,
flashes and the caller information is displayed.
1. Press key to answer the call.
2. Press key again to end the call.
With base unit
When there is an incoming call,
1. Press key or pick up the handset to answer the call.
2. Press key again or hang up the handset to end the call.
Note: Call timer shows the duration of your current call on the display.