Filter
Top Products
MENU SETUP
29
Ringer melody setting
During Audio setting mode,
1. Press ! or key to select “Ring Tone” from the display.
2. Press OK key to enter.
“
Ring Tone-1” is displayed and the sound of the current tone can be heard.
3. Press ! or key to select the step. There are 5 steps for adjustment.
4. Press OK key to confirm the selection and return to the previous mode.
Key tone setting
During Audio setting mode,
1. Press ! or key to select “Key Tone” from the display.
2. Press OK key to enter. “Key Tone -Off” is displayed.
3. Press ! or key to switch between “Key Tone On/Off”.
4. Press OK key to confirm the selection and return to the previous mode.
Answering system (TAD) settings
1
. Enter “TAD setting” mode (Refer to the operation in “Audio setting” section on
P28).
2. Press ! or key to select the item that you wish to set. The display is
shown in this order: Answering
TAD Rings TAD PIN Call Screen
dashes to show that you have reached the end of the menu.
3. Press OK key to confirm the item that you wish to set.
Ringer loudness setting
During Audio setting mode,
1. Press ! or key to select “Ring Loudness” from the display.
2. Press OK key to enter.
“
Loudness-4” is displayed and the sound of the current step can be heard.
3. Press ! or key to select the step. There are 4 steps and “off” for
adjustment.
4. Press OK key to confirm the selection and return to the previous mode.