Filter
Top Products
MENU SETUP
28
Audio settings
During standby mode,
1. Press OK key to enter the menu set mode.
2. Press ! or key to select the item
“Audio” from the display.
3. Press OK key to enter Audio setting. The
display on the right is shown.
4. Press ! or key to select the item that you wish to set. The display is
shown in this order: Ring Tone
Ring Loudness Key Tone dashes to
show that you have reached the end of the menu.
5. Press OK key to enter the item that you wish to set.
6. Press key to return to the previous menu.
Menu Setup
Key lock
During standby mode, on the base unit.
1. Press OK key to enter menu set mode.
2. Press ! or key to select the item that you wish to set. The display is
shown in this order: Key Lock
Audio TAD setting PABX setting
Setting.
3. Press OK key to enter the item that you wish to set or press key to exit
menu set mode.
Before setting key lock, you have to input a 4-digit PIN code first. The default setting is
0000.
1. Enter 0000.
2. Press OK key, the display on the right is
shown.
3. Press ! or key to select “Off” or “On”
from the display.
4. Press OK key to confirm and return to the previous mode.
5. Press key to return to the main menu.
Note: All the previously stored settings are shown after opening the submenu.