Oricom ECO700 Cordless Telephone User Manual


  Open as PDF
of 36
 
19
ANSWERING MAChINE OpERATION (ECO700 ONLY)
Erasing the Outgoing Message
Erase the outgoing message as follows:
• Selectthedesiredoutgoingmessagebypressingand
holdthe[
] key.
• Pressthe[
] key to play the outgoing message.
• Keeppressingthe[
]keywhentheOGMisplayed
back.
Turning Answering Machine On/Off
Iftheansweringmachineison,the2x7segmentLED
display will light up and the machine will automatically pick
upthelineafteranumberofrings(see“Settingnumberof
Rings”).
• Press the [
] key to switch on the answering
machine.The2x7segmentLEDwillbeturnedon.
• Pressthe[
] key again to switch off the answering
machine.The2x7segmentLEDwillbeturnedoff.
Note:
•Eveniftheansweringmachineisoff,themachinewill
automaticallypickupafter16ringsinordertoenable
remoteactivation(see“RemoteOperation”).
Setting number of Rings
The number of rings after which the answering machine
willanswercallscanbesetfrom2–9andTS(Tollsaver).
The standard setting is 3rings.InTollsavermode,the
machinewillanswerafter5ringsiftherearenonew
messages,andafter2ringsiftherearenewmessages.If
there are no new messages and you call your machine to
checkyourmessagesremotely(See“RemoteOperation”),
youcanhangupafterthe2ndring.Youdonotneedtopay
connectionfeesandyouknowthatyoudonothaveany
new messages.
• Brieflypressthe[
] key. The display will show the
current numbers of rings.
• Pressthe[
] key for 2 secs to set the number of
ringing tones.
• Pressthe [
]or[ ] key to change the
current number of rings.
• Conrmthesettingbypressingthe[
] key.
• Ifyoudonotpressanykeysfor3seconds,themachine
willrevertbacktotheansweringmachinemenu,without
changing the settings.
• Ifthereisalossofpowerinthebase,thenumberof
ringswillrevertto5.
 previous next