Oricom ECO700 Cordless Telephone User Manual


  Open as PDF
of 36
 
16
CORDLESS hANDSET OpERATION
Multi-handset Operation
Youreco70/700seriesphonecanhaveupto5handsets
registered to the base unit. Each handset has its own number
HS-1,HS-2,HS-3,HS-4andHS-5,shownontheleft-hand
sideofthedisplay.With2ormorehandsetsyoucan:
• Makeintercomcallswhileonanexternalcall
• Switchbetweenanexternalcallandintercomcall
• Transferanexternalcallfromonehandsettoanother
• Set a 3-way conference callbetween yourself, an
external call and intercom call
Note:
•Amaximumof1xexternalcalland2xintercomcallscan
take place at the same time.
•Ifyoumakeanexternalcall+anotherhandsetisonline
= result in a busy tone.
•Youcanmakeanintercomcallwhentheotherhandsetis
in progress.
Call transfer between cordless handsets
Duringexternalcall,
1. Press[INT]key.Thefollowingwillappearonthedisplay.
2. Keythe handsetnumber (2,3, 4or 5)you wishto
transfer.
3. Press[
] keytoexitIntercommodeandreturnto
standby mode.
Conference calls
Thisfunctionallows3parties(yourself+externalcall+
intercomcall)tobeconnectedatthesametime.
Duringexternalcall,
1. Press[INT]key.Thefollowingwillappearonthedisplay.
2. Keythehandsetnumber(2,3,4,5)youwishtoinviteto
the conference.
3. ThenyoucanhaveanintercomcallwithHS-x.
4. Atthismoment,youcanpressandhold[INT]keyfor3
secondstogoto3-wayconferencecall.
Cordless handset keypad lock
Duringstandbymode,
1. Pressandhold[
] key to lock the keypad.
2. Toreleasekeypadlock,pressandhold[
]keyfor3
seconds.
 previous next