Oricom ECO700 Cordless Telephone User Manual


  Open as PDF
of 36
 
11
CALLER ID OpERATION
If yousubscribe toyourtelephone operators service
(chargesmayapply),numbersoftheincomingcallswillbe
displayedonthescreenandstoredinthecalllog(please
consultyourtelephoneserviceproviderfordetails).
Theeco70/700seriescanstorethelast20callsincluding:
therecordnumber,date/time,andphonenumber(upto23
digitsforthecordlesshandset).
Whenyouhavenew/unansweredcalls,
flashes on the
cordlesshandset.Ifacallhasbeenanswered,thenthecall
is set to old call.
Call waiting (Australia only)
Youcanusetherecallfunctiontoanswerasecondcall
whileyouareonthephone.Howeverthisserviceneedsto
beturnedon.Forexample,toturnonTelstra’sCallWaiting
service:
1. Press[
] on the cordless handset to wait for dial tone
thenpress[ ][4][3][#].
2. Youwillhearaservicetonethenpress[
] again.
Take two different calls at the same time
Duringacall,youwillheartwoloudbeepsperiodicallyto
notifyyouofanotherincomingcall.Ifyouwishtoanswer
thiscall,
1. Press[ ]key.Youwillhearadialtone.
2. Press[2 ] to put the current call on hold and talk with
the second caller.
3. Repeatsteps1-2toswapbetweenthetwocallers.
Review Caller ID records
Duringstandbymode,
1. Press[
] key to display the latest call. The following
will appear on the display.
45748888
Ifthelistisempty,“NO”isshownonthedisplay.
2. Press[
]keytoviewthedataandtimeoftheCID.
3. Press[
]keytoviewtothepreviouscall.
Press[ ]keytoviewthenextcall.
Onlywhenthenetworksendsthetime/datetogetherwith
thetelephonenumber!OnsomenetworkswithcallerID,
time and date will not be displayed.
 previous next