Filter
Top Products
The System
22
The System
REGISTERING YOUR HANDSET
Registration allows communication between your base unit and handset(s). If your handset is not
registered, you will not be able to make a call or use some of the functions and features on the
phone.
If your handset displays UNREGISTERED, follow the steps below to register your handset.
1. Press on the base unit for 4 seconds.
2. Press on the handset.
3. Select SYSTEM Æ REGISTER. Press .
4. Enter the system PIN (Pre-set: 0000).
5. Press 1 to select the base number you want. Your handset starts searching for the base.
Registration shall be completed within 30 seconds. If registration is successful, the signal
icon displays steadily. If registration failed, repeat the above procedure.
DELETING A HANDSET
Use one handset to delete (de-register) another handset that shares the same base unit.
1. Press .
2. Select SYSTEM Æ DELETE HS. Press .
3. Select the handset (number) you want to delete. Press .
4. Enter the system PIN. Use to make correction.
5. Press . The handset is deleted.
CHANGING THE SYSTEM PIN
The system PIN is used for registering, deleting handsets, and protecting the access rights to some of
the other menus. The pre-set system PIN is 0000. You can personalize the PIN for greater security.
1. Press .
2. Select SYSTEM Æ CHANGE PIN. Press .
TIP
:
Handset Number. The handset number displays beside the handset name
during standby.
NOTE
:
Your base can register up to 4 handsets. After registering 4 handsets,
your base unit registration memory is full. If you attempt to register an
additional handset, registration will not be successful.
NOTE
:
Your handset is already registered when you buy 1-4 handset packs.
TIP: Use or to navigate the menus.