Filter
Top Products
- 21 -
6. Enter the old 4 digits PIN number from the numeric keypad (Default
PIN code is 0000).
7. Press OK button. The display shows
.
8.
Enter new PIN number (max. 8 digits) from the numeric keypad.
9. Press OK button to confirm. The LCD shows
.
10.
Use numeric keypad to re-enter the new PIN.
11. Press OK to confirm and exit to
.
12 Press and hold CANCEL to exit to standby mode.
Recall time selection
Your phone has a preset Recall time of 100ms for Australia and 600MS for New Zealand, however, If you
connect your phone to an extension (PBX) the RECALL duration may be different. Your can select a different
timing (80, 100, 180, 300 or 600 msec) from the menu system.
1. Press OK button.
is displayed.
2.
Use DOWN button to scroll to . Press OK button.
3.
Use DOWN button to scroll to the option .
4. Press OK. The display will show ‘
: X’ (X= Flash time 1 to 5).
5. or
Use UP or DOWN button to select your desired flash time.
6. Press OK button to confirm and exit to RECALL.
7. Press and hold CANCEL to exit to standby mode.
Pause time selection
If you connect your phone to an extension of a Phone system (PBX) you may need to insert a Pause in the
dialling and memory store sequence. Options for pause timing are:- 1, 1.5, 2 and 3 sec.
1. Press OK button. ‘
’ is displayed.
2.
Use DOWN button to scroll to .
Press OK button.
3.
4.
Use DOWN button to scroll to the option .
Press OK. The display will show ‘
: X’ (X= pause time 1 to 4).
5.
6. or
Use UP or DOWN button to select your desired pause time.
7. Press OK button to confirm and exit to PAUSE.
8. Press and hold CANCEL to exit to standby mode.