Filter
Top Products
- 9 -
1) Press ‘TALK’ button to answer the call.
2)
To end the call, either press TALK button or place the handset
back on the base.
Re-dialing
The last 10 dialled external numbers are stored for redialling (in the re-dial list). The number can consist of
up to 25 digits. The user can select any number on the redial list to redial in pre-dialling mode. The last calls
appear with their name if they are stored in the phonebook.
To redial any of the last 10 numbers called
1) In standby mode, press UP button. The last number dialled is
displayed.
2) or
Scroll through the calls with UP and DOWN buttons.
3) Press OK button to toggle between name and number if necessary.
4) If you don’t want to redial, use CANCEL to exit.
5)
Press TALK button when the number you desired appears.
6)
To end the call, press TALK again or replace the handset on the
base unit.
Using MUTE
During a call you can mute your voice so that you can speak privately to a third party without the caller being
able to hear you. You will still be able to hear your caller.
1)
During a call, press the MUTE button (the mute icon will appear in
the LCD)
2)
Press the MUTE button again to talk to your caller again.
Using Recall
This button is used for network services – e.g. to access call waiting, conference calling and
other services provided by your local phone service provider. Subscriptions may apply.
Using Pause function
Press and hold the UP button for about 3 sec, you can insert a pause in
the memory dialling sequence.
Adjust the handset earpiece volume during a call
or
during a call, use the ‘UP’ or ‘DOWN’ button, you can adjust the receiver volume to a high or
low level. The display will show ‘
n’ (n=volume level from 1 to 5).