Oricom BB100 Cordless Telephone User Manual


 
- 11 -
5. Press OK button to confirm.
is displayed.
6.
Input phone number (max. 25 digits) from keypad.
7. Press OK button to confirm.
is displayed again
8. To add another phone book entry, follow steps above.
9.
To exit, press the TALK button to go back to the standby mode.
Reviewing the phonebook
a. To access phonebook via ‘Menu’ option:
1. Press OK button.
is displayed.
2. Press OK button.
is displayed.
3.
Press DOWN button to scroll to the option .
4. Press OK button when
displayed.
5. Press OK button. The first phone book entry is displayed.
6. or
Use UP and DOWN button to scroll until the required name is displayed.
7.
You can also use the alphanumeric keys to view the entries. When a key
between 2 and 9 is pressed, the first entry of the name that starts with the
first character of the key is displayed. Pressing the same key again
displays the first entry of the name that starts with the next character on
the key and so on. E.g. press ‘2’ key once, to jump to the first
entry in the list that starts with ‘A’. Press ‘2’ again to jump to the first entry
in the list that begins with ‘B’.
Note: When searching PHONEBOOK entries by letter and there is no
entry stored with that letter, it will not display the next letter in
alphabetical order - the screen information will remain unchanged.
8. Press OK button to view the number. If the number consists of more
than 12 digits, then the
symbol is turned on and the first 12 digits of
the number are displayed. Press DOWN button to display the remaining
digits. Press OK again to display the name of the entry.
9. Press CANCEL to exit to standby mode, or
10.
Press the TALK button to dial out the number shown on the display.
b. A simple way to access phonebook
you can access phonebook simply by pressing the phonebook button in standby mode
Dialing a phone book entry
While reviewing the phonebook, you can -
1)
Press TALK button when you see the desired phone number showing on the display
2)
To end the call, press TALK button again or replace the handset on base.