Filter
Top Products
Omegaphone
®
OMA-P1104 User’s Manual
42
4.11 Intercall Time
The Intercall Time is the programmable period of time the
OMA-P1104 waits in calling subsequent telephone numbers.
Intercall Time is activated only after alarm dial-out to the first
telephone number fails to be acknowledged. This period can
be programmed from 10 seconds to 60 minutes. The default
intercall time is 1 minute.
If an incoming telephone call is made to the OMA-P1104
during Intercall Time (in between its dialing of subsequent
telephone numbers to report an alarm), it will answer the
incoming call and immediately report any existing alarms. The
manner in which the incoming call is answered depends upon
whether or not TAD is enabled or disabled:
• If TAD (Telephone Answering Device) is enabled,
Rings Until Answer will be 1.
• If TAD is disabled, Rings Until Answer will be 10.
Refer to Section 4.5, Rings Until Answer, and Section 4.6,
TAD (Telephone Answering Device).
4.11.1 Programming Intercall Time
To program Intercall Time:
1. Press SET.
SET
#
2. Press INTERCALL TIME.
3
INTERCALL
TIME
The OMA-P1104 will respond: “Enter minutes.”
3. Using the number keys, enter the minutes.
The OMA-P1104 recites the digits as you press them.
1
CALL
DELAY
2
VOICE
REPS
3
INTERCALL
TIME
4
MAX CALLS
5
TEMP LIMITS
6
CALIBRATE
7
RECOGNITION
TIME
8
CLOCK
9
LISTEN TIME
SOUND
0
ID NUMBER
POWER