Filter
Top Products
Connecting the components
30
Figure 6: Remove the stand cover
2. Connect the AC power adapter (optional). Connect the adapter to the
AC adapter jack in the bottom of the phone. Form a small bend in the
cable, and then thread the adapter cord through the channels in the
stand.
Note 1: Your IP Phone 1140E supports both AC power and Power
over Ethernet options, including IEEE 802.3af standard power. To
use local AC power, the optional AC adapter can be ordered
separately. To use Power over Ethernet, where power is delivered
WARNING
Use your IP Phone 1140E with the approved Nortel AC
Adapter (model #N0089601).