Filter
Top Products
Selecting a ring tone 75
Figure 6
Softkeys on IP Phone
Volume Control Bar
Use the Volume Control Bar to adjust the volume of the handset,
speaker or ringer while active. Raise or lower the volume of each by
pressing the right or left sides of the bar.
Selecting a ring tone
Follow this procedure to select a ring tone.
Step Action
1 From the Menu Option screen, select Audio.
2 Select Play Ring Patterns.
3 Select a ring pattern. You can listen to it using the Play and
Stop options.
4 Select a new ring pattern by pressing the Apply option.
5 Press Cancel to exit the Play Ring Patterns screen.
--End--
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.