Filter
Top Products
13
.
Connecting the IP Phone 2004
components
Before you begin
CAUTION
Damage to Equipment
Do not plug the IP Phone into a regular telephone jack. This
results in severe damage to the IP Phone 2004. Consult your
system administrator to ensure that you plug your telephone into
a 10/100BaseT Ethernet jack.
See Figure 1 "IP Phone 2004" (page 10) for the location of the connectors.
Step Action
1 Connect one end of the handset cord to the handset jack
(identified with a handset icon) on the back of the telephone.
Connect the other end to the jack on the handset.
2 Choose one of the following connections:
• For an IP Phone not sharing LAN access with a PC, connect
one end of the CAT5 line cable to the LAN Ethernet port
(identified by a LAN icon) located on the back of the phone.
Plug the other end of the CAT5 line cable into the IP network.
• For an IP Phone sharing LAN access with a PC, connect
one end of the CAT5 line cable to the LAN Ethernet port
(identified by a LAN icon) located on the back of the phone,
and the other end to the IP network. Insert a second CAT5
line cable into the PC Ethernet port located on the back of the
phone (identified by a PC icon) and the other end into the
computer Ethernet port.
3 Contact your installation technician for the correct power option.
The IP Phone can be powered by an AC adapter, or over a LAN.
4 For a secure power connection, thread the excess cord around
the strain relief retaining hook and channel provided.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.