Filter
Top Products
15
.
Logging on
Follow this procedure to log on to the network. If the Centrex IP Client
Manager (CICM) is set up as part of a group of CICMs, you can choose
which CICM to connect to. After you select a gateway, the terminal directs
itself at that CICM and the Username screen appears.
If a firmware upgrade for the IP Phone is available, the system prompts
you to upgrade when you log on. If the firmware level is between the
minimum and maximum level set by the administrator, Yes and No options
appear on the soft keys. If the terminal is below the minimum level, the
only option available is Yes. You cannot log on until you perform the
upgrade. To perform an upgrade, see “Performing a firmware upgrade”
(page 49).
Step Action
1 If the Selective Gateway Login feature is configured on your
system, navigate through the list to select the gateway.
2 When the gateway you want appears, press Ok, or start entering
your user name.
If the Username screen appears when you start to enter your
user name, the characters you already entered appear at the
beginning of the Username field.
3 If you make a mistake, press Clear to clear the field, and then
enter the user name again.
If your user name is too long for the display (longer than 15
characters), the digits scroll to the left and an ellipsis appears to
the left of the user name.
4 Press Ok.
The Password screen appears.
5 Enter your password. For security, the password characters are
displayed as asterisks (*).
6 If you make an error, press Clear to clear the field, and then
enter the password again.
7 Press Ok.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.