Filter
Top Products
Using the Assign menu 31
3 Press Feature.
The directory contact list opens.
4 Scroll through the list and select the entry to assign to the feature
key.
5 Press Ok.
A check mark appears beside that entry in the directory. The
number is dialed when you press the key.
--End--
Enabling or disabling autoscroll
If autoscroll is enabled, the IP Phone automatically directs you to the
screen for the active feature. For example, if your secondary Directory
Number (DN) is configured on screen two, and you receive a call to that
number, the feature screens scroll to page two. You can answer the call
immediately without searching for the screen.
Follow this procedure to enable or disable the AutoScroll feature.
Step Action
1 From the main menu, open the Feature menu.
2 From the Feature menu, select and open Assign.
The Assign menus opens.
3 From the Assign menu, select AutoScroll.
4 Press Ok.
The AutoScroll screen appears.
5 Perform one of these actions:
• To enable autoscroll, select Enable.
• To disable autoscroll, select Disable.
6 Press Ok.
A check mark appears beside the option you selected. You
return to the Assign menu.
--End--
Enabling or disabling the Inbox
Follow this procedure to enable or disable the Inbox feature.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009 09.01 Standard
4 July 2008
Copyright © 2008 Nortel Networks
.