Filter
Top Products
i2021 ISDN Teleset
2
n TILTING DISPLAY (BACKLIT)
Your Teleset has a Liquid Crystal Display (LCD) with 9 settings for the
optimum-viewing angle. It displays Caller ID information, CalLog
entries, and is used to set up and manage Teleset operation.
n CLOCK AND ALARM
The display includes a time-of-day clock, and a timer that shows how
long you are on a call. A separate timer is kept for each Call
Appearance. You can also program the clock to operate as an alarm
clock, with up to eight different alarm times.
n PASSWORD PROTECTION
A password can be used to safeguard your programmed options and
features.
n NON-VOLATILE MEMORY
Any options you program into the Teleset are protected from
accidental loss by power failures. This allows you to move the Teleset
to another location without worry.
Voice Operation Features
n FEATURE KEYS
Such features as Hold, Transfer, Drop, and Conference, are supported
on the Teleset.
n CALL STATUS LAMPS
Each programmable hardkey contains a two-state (red/green) lamp to
show the status of Call Appearance or Feature Keys.
n LOCAL FEATURES
These keys include: MUTE, MENU, REDIAL, SPEAKER,
VOLUME (Down) / VOLUME (Up) .
n MESSAGE WAITING LAMPS
These indicators flash (red) to alert you to a message (held) at your
message center. Contact your service provider for this service.
n AUTOMATIC HOLD
During a call, you can answer an incoming call or initiate another call
by pressing a Call Appearance (CA) key. Your first call is
automatically placed on hold.
n SPEAKERPHONE
A base-mounted speaker and microphone allow hands-free operation.
The speaker is automatically turned off when the far-end party
terminates the call.
n VOLUME CONTROL
This key controls the loudness of the handset, headset,
speakerphone, and the ringer intensity.
n RINGER CONTROLS
Up to ten different ringing patterns and five separate alarm patterns
may be chosen.