Filter
Top Products
i2021 ISDN Teleset
60
The i2021 Teleset contains feature keys up to key 96. Feature keys above
key 16 are automatically assigned to softkeys. However, all keys may be
mapped to hardkeys if desired. For further information, refer to the
paragraph that explains “key mapping.”
To Use the Inspect feature, press the Inspect Feature key.
You can then either press one of the hardkeys (1-16), or enter a number
on the dial keypad. For example, suppose you wish to inspect key 2. First
press the Inspect key, then press key 2. The switch then displays the Call
Appearance, or feature, assigned to key 2. Perhaps you wonder what is
assigned to key 60? To find out we must remember that keys over 16 are
automatically assigned to a softkey. Since key 60 is a softkey, you must
enter 60 followed by a # sign, on the keypad. The switch then displays the
Call Appearance or feature assigned to key 60.
INSPECT OR VIEW?
The i2021 Teleset has a “local inspect” feature built into the Teleset. The
local inspect feature is called “View Key”. Refer to the paragraph that
explains View for additional information. What is the difference between
Inspect and View? View shows the user the Teleset information about a
specific key. Inspect displays what the switch has actually assigned to
that key.
View
View is a feature that is local to the phone. It will only reflect the current
programming of the phone. To ensure accuracy, perform a Parameter
download before using View Key.
Key assignments should be checked if features/options do not seem to
work correctly. Often the Teleset is blamed for incorrect or missing key
NOTE: Inspect is a timed feature in the switch. After pressing
the Inspect key, you are given about ten seconds to
enter the key number that you wish to inspect.