Nortel Networks 5100 IP Phone User Manual


 
32 First time installation of the IP Phone 1535
be located using DNS to lookup the domain information of the service
provider.
Enabling STUN protocol
Step Action
1
From the Main Menu, select Settings > VoIP Settings > Proxy
> STUN > Enable.
2
Press OK.
—End—
Configuring the STUN server
Step Action
1
From the Main Menu, select Settings > VoIP Settings > Proxy >
STUN > STUN Server.
Note: If the domain name is used, the STUN server domain
should be configured on the DNS server.
—End—
Configuring VoIP domain name information
In order for the IP Phone 1535 to connect to your installed IP telephony
services, you must access and configure the MCS 5100 network domain
name parameter.
Step Action
1
From the Main Menu,gotoSettings > VoIP Settings > Misc. >
Domain Name, and press OK to accept selection.
2
Enter the value for your network VoIP Server as required, and press
OK to confirm changes.
—End—
Nortel Multimedia Communications Server 5100
Nortel IP Phone 1535 Installation and Commissioning
NN43160-300 00.13 Preliminary
Release 4.0 22 August 2007
Copyright © 2007, Nortel Networks
.