Filter
Top Products
18
www.nextel.com
12 characters, you can press P under “More” to see the remaining
characters. To return to the start of the number, press P under
“Numbr”.
You can store up to 100 names, phone numbers and Private IDs using
the following steps:
NOTE: To see the name with Caller ID, enter the caller’s 10-digit regu-
lar phone number (703-555-9999) in your phone list (see
“Caller ID” on page 35).
1
Press * then # then 2 then 0.
2
The message: 20=Phone / Prvt List displays. Press P under
“OK”. Another message will display with the remaining number
of slots available. The phone will then display the Enter Name
screen.
3
Enter the name of the individual you want to store.
(Notice, each key has a number and several letters. To select
different letters on a key, quickly press the key until the desired
letter displays. For example, to enter the letter Y you must press
9 3 times quickly. Also, you can press and hold # to
change the case of the letter you just entered (lower to uppercase
and upper to lowercase). The default style is uppercase.)
NOTE: Press the left side of Q to backspace or delete a
letter. Press the right side of the
Q to insert a
space.
After you have entered the name, press P under “Store”.
4
Enter Phone Number displays. Enter the person’s area code
and phone number and press
P under “Store”.
Remember to add plus and pause entries if desired. See “Pause
Digit Entry” on page 19 and “Plus Dialing” on page 28.
5
The name and Spd# = displays. The system automatically
assigns a Speed Dial number, which you can change by entering
a new number. Press
P under “Store”.
6
Enter PrvtID displays. Enter the person’s Direct Connect
Private ID. Press P under “Store”.
7
Repeat steps 2 through 6 to add additional names/numbers.
8
Press P under “Exit” when you have finished.
NextelUG_i700.fm Page 18 Friday, June 16, 2000 3:15 PM