NETGEAR SPH200D Cordless Telephone User Manual


 
Cordless Internet Phone with Skype Model SPH200D User Manual
Settings and Maintenance 7-11
v1.0, November 2006
No parking tone. Check the power connections of the charger.
The handset may not be placed properly. Try again.
Charging contacts may be dirty. Clean contacts with a damp cloth.
Turn on the handset tone. See “Personalizing Your Handset Display”
in Chapter 6.
Switch on the handset’s power. See “Powering Your Handset On and
Off” in Chapter 1.
Handset on the charger does not
charge.
The battery may be defective. Purchase new batteries from your
dealer.
Check that the batteries are inserted correctly.
Make sure that the handset is placed properly on the charger. The
battery icon is animated while charging.
No display. Check that the battery is charged.
Check the connections.
Bad audio (crackles, echo). The handset may be nearly out of range. Move closer.
The phone may be interfered by nearby electrical appliance. Move
the base unit to a different location.
The phone may be at a location with thick walls. Move the base unit
to a different location.
Handset does not ring. Check that the handset ringer is turned on. See “Personalizing Your
Handset Display” in Chapter 6.
Caller ID does not display. Caller ID service may not be activated. Check with your service
provider.
The caller’s information may be withheld or unavailable.
Cannot make or answer a second
call.
Second call service may not be activated. Check with your service
provider.
For landline calling, check that the recall selection is correct. See
“Recall Selection” on page 7-6.
Table 7-1. Troubleshooting Tips (continued)