Filter
Top Products
Cordless Internet Phone with Skype Model SPH200D User Manual
2-2 Installation
v1.0, November 2006
Charging the Batteries
To charge the batteries, follow these steps:
1. Connect the power adapter of the charger to the charger and a standard wall outlet.
2. Place the two rechargeable batteries (provided) into the battery compartment of the handset.
3. Slide the battery door firmly into place.
4. Place the handset on the charger.
Danger: There is a risk of explosion if the battery is replaced by an incorrect type. Never
use non-rechargeable batteries. Use the rechargeable NiMH batteries, size AAA
1.2V 750mAh (HR11/45) that are supplied with this product.
Figure 2-1
Note: Charge for 14 hours before initial use.